Garage Floor Epoxy Coatings in Ocala, FL

Epoxy is an excellent material for basecoats because of its strong adhesion and ability to block moisture coming up from the ground. However, standard epoxy is sensitive to UV rays (which causes it to yellow in sunlight) and is less scratch-resistant than polyaspartic. Polyaspartic is a next-generation coating that is 100% UV stable, meaning it won't yellow or fade. It is also four times harder than standard epoxy, making it highly resistant to scratches and impact. We use a hybrid system to combine the best benefits of both materials.

No, our professional coatings will never peel from hot tires. Hot-tire pickup occurs with low-quality, water-based DIY paints or when concrete is not properly prepared. Because we use heavy-duty planetary diamond grinders to open the pores of the concrete, our 100% solids epoxy wicks deep into the slab. It creates a permanent mechanical and chemical bond that cannot be broken by hot tires or heavy weight. We back this with a lifetime warranty.

Maintaining your new polyaspartic flake floor is extremely simple. Because the surface is seamless and non-porous, dust and dirt cannot stick to it. For daily cleaning, a simple sweep or dust mop is usually all that is needed. For a deeper clean, you can hose the floor down or use a squeegee with a mixture of warm water and a mild, non-filming detergent (like Simple Green or Dawn). Avoid using abrasive cleaners, wax, or acid-based cleaners, as these can dull the high-gloss clear coat over time.

Absolutely. Concrete prep is 90% of our job, and we never coat over cracks or damaged concrete. We use specialized diamond concrete saws to open up and clean out all cracks, and then fill them with a rapid-curing polyurea joint filler. Once cured, we grind the repaired areas perfectly flush with the rest of the floor. When the final flake system is applied, these repairs become completely invisible, and the floor looks like a continuous, seamless slab.